Types of ferrules

Ferrules for hydraulic hoses, textile braids, metal braids, steel layers.

Ferrules

 

Ferrules for textile reinforced hose :

At the forward end of the ferrule, the recess G is designed to lock onto the collar of the hydraulic insert during swaging : the insert and the ferrule therefore become interdependent.
Moreover, the back-stop B is designed to facilitate mounting and enhance reliability of the hose which cannot hinder the positioning of the collar during swaging.
Barbs (detail C) are not very pronounced, so as not to damage either the textile structure of the hydraulic hose or its outer cover which is not skived before swaging.

Douilles  pour tuyau à renfort textile

Ferrules for steel-reinforced hose with internal and external skiving :

At the forward part of the ferrule, the heel T is designed to lock into the collar of the hydraulic insert during swaging in order to obtain an interdependent assembly.
The boss (detail D) is destined to be swaged directly onto the high-tensile steel spirals, which have previously been skived on the inside and outside, locking them into a female recess on the tail of the hydraulic insert.
Resistance is of high quality, assembly being metal to metal.
The barbs (detail D) are designed to ensure sealing of the inner tube through external compression on the metal spirals.
The back inner shape (detail E) of the ferrule is designed to ensure sealing between the ferrule and the outer rubber cover, in such a way as to prevent any external agent from corroding the metal reinforcement of the hose.
Swaging is considered correct when the internal bore of the hose insert has collapsed by several tenths of a millimeter according to recommendations by TECALEMIT FLEXIBLES®.

douilles-hydrauliques

Ferrules for steel-reinforced hose without external skiving :

At the forward end of the ferrule, the recess G is designed to lock onto the collar of the hydraulic insert during swaging : the insert and the ferrule therefore become interdependent.
Moreover, the back-stop B is designed to facilitate mounting and enhance reliability of the hose which cannot hinder the positioning of the collar during swaging.
The internal barbs (Detail C) are very pronounced and sharp. During swaging, these barbs bite through the rubber outer cover and into the steel braid or spiral of the hose.
Swaging is correct when the internal bore of the hose insert has collapsed by several tenths of a millimeter accroding to recommendations by TECALEMIT FLEXIBLES®

Douilles pour tuyau avec  tresses ou nappes acier  sans dénudage extérieur

Ferrules for steel-reinforced hose with external skiving :

At the forward end of the ferrule, the recess G is designed to lock onto the collar of the hydraulic insert during swaging : the insert and the ferrule therefore become interdependent.
Moreover, the back-stop B is designed to facilitate mounting and enhance reliability of the hose which cannot hinder the positioning of the collar during swaging.
The barbs (detail C) , of a fir-tree shape, are pronounced without being sharp.
These barbs bite into the steel braid or spiral of the hose which has been externally skived beforehand.
Swaging is considered correct when the internal bore of the hose insert has collapsed by several tenths of a millimeter according to recommendations by TECALEMIT FLEXIBLES®.

Douilles pour tuyau avec tresses ou nappes acier  avec dénudage extérieur

Selection of ferrules according to hose type :

Save
Cookies user preferences
We use cookies to ensure you to get the best experience on our website. If you decline the use of cookies, this website may not function as expected.
Accept all
Decline all
Read more
Unknown
Unknown
Accept
Decline
Analytics
Tools used to analyze the data to measure the effectiveness of a website and to understand how it works.
Google Analytics
Accept
Decline
Google Analytics
Accept
Decline
Advertisement
If you accept, the ads on the page will be adapted to your preferences.
Google Ad
Accept
Decline