Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Composites tubes MANUFLEX®
Manuflex® tubes are comprised of an NBR nitrile rubber inner tube, a single galvanised steel braid and an outer cover in translucent flexible PVC.
The inner tube is obtained by extrusion.
It is then braided in a horizontal braider and passes through an angle head extruder which applies the outer cover in translucent polyvinyl chloride to protect the steel braid from external aggression.
Manuflex® tubes are :
- Very robust with regards to impacts.
- Highly polyvalent.
- Very flexible.
- Easy to maintain.
Very flexible, Manuflex® tube is highly safe for everday use. its burst pressure is very high and its translucent PVC outer cover, whilst protecting the steel braid, allows users to check the condition of same.
It is for this reason that this is used as a multipurpose hose in the chemical industry.
Admissible working temperatures of Manuflex® tubes range from 0°C to +60°C.
Marking of manuflex tubes is as follows : tecalemit flexibles - part N° - manuflex - ID - batch N°
Table of Manuflex® working pressure ratios with regards to working temperatures
| T(°C) | 0° to +20° | 30° | 40° | 50° | 60° |
| Pressure (%) | 100% | 100% | 100% | 100% | 100% |
The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness.
NBR tube, galvanised steel braid and translucent pvc cover
| Part n° | Outer diameter (mm) | Inner diameter (mm) | Wall thickness (mm) | Non-burst pressure limit 20°c (bars) | Working pressure 20°c (bars) | Weight (gr/mm) | Bend radius (mm) | Tolerance on outer diameter (mm) | Tolerance on inner diameter (mm) | Available |
| 0010610030 | 10,2 | 4 | 3 | 130 | 43 | 128 | 30 | +0,30/-0,30 | +0,50/-0,50 | Long lengths |
| 0010610040 | 12 | 6 | 3 | 114 | 38 | 152 | 40 | +0,30/-0,30 | +0,50/-0,50 | Long lengths |
| 0010610050 | 15 | 8 | 3 | 114 | 38 | 222 | 60 | +0,30/-0,30 | +0,50/-0,50 | Long lengthsr |
| 0010610040 | 16 | 10 | 3 | 108 | 36 | 51 | 75 | +0,40/-0,40 | +0,50/-0,50 | on request |
| 0010610070 | 18 | 12 | 3 | 81 | 27 | 62 | 90 | +0,40/-0,40 | +0,50/-0,50 | on request |
| 0010610080 | 22 | 15 | 3,5 | 78 | 26 | 90 | 180 | +0,40/-0,40 | +0,50/-0,50 | on request |
