Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Hydrocarbon delivery rubber hoses
 | Ref 401 |
 Ø 19 | |
 Ø 25 / Ø 50 | |
 Ø 38 / Ø 50 / Ø 63 | |
Intended for suction and delivery of tar, bitumen and hot petroleum products, hose 401 has excellent resistance to ozone and bituminous products thanks to the quality of its covering.
The hose structure is protected from heat by a fibreglass interlayer and it has a low bend radius.
It can be supplied equipped with half-symetrical, threaded or flange fittings along and deliver certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
- In Ø 19, Its reinforcement consists of two metal wire spirals.
- In Ø 25 is protected by an external metal spiral and produced in predetermined lengths with flexible cuff-ends.
- In Ø 38, 50 and 63 have a smooth outer cover and can be cropped to length.
- In Ø 50, we offer a variant identical to Ø 25.
Technical specifications :
Inner tube : smooth black synthetic rubber
Reinforcement : fibreglass protection, textile plies and metal spiral
Outer cover : abrasion and weather resistant CR / NBR rubber
Outer finish :
- Ø19, Ø 38, Ø 50 et Ø 63 : smooth
- Ø 25 : corrugated (external metal protection spiral for Ø 25 and 50)
Temperature : + 180°C max
Production lengths : 40 meters. Ø 25 : 5, 8, 15 meters
Electrical conductivity : 1 copper braid or external spiral
Colour : black
Particularities : oversized cuff-ends Ø 25, 50
Marking : TECALEMIT - PART N° - BITUMEN 180°C - PS 10 BARS - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| * 401 19 | 19 | 3/4” | 32 | 6,5 | 10 | 40 | 130 | 1,00 |
| * 401 25 | 25,4 | 1” | 43 | 8,5 | 10 | 40 | 200 | 1,30 |
| * 401 38 | 38,1 | 1”1/2 | 56 | 9 | 10 | 40 | 260 | 1,89 |
| * 401 50 | 50,8 | 2” | 70 | 10 | 10 | 40 | 300 | 2,60 |
| * 401 63 | 63,5 | 2”1/2 | 81 | 9 | 10 | 40 | 400 | 3,00 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Male threaded, Guillemin
See also 402, 411
 | Ref 403 | |
 |  EN 1360 : 2013 | |
The hose 403 is intended for the equipment of the reels of the fuel distribution tankers.
Manufactured in accordance with the EN 1360: 2013 standard, in the lightest possible way, it has a very thin striped rubber coating very resistant to abrasion.
We deliver it fitted with male or female male or female BSPP fittings 1''1/2 in steel and certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
The male threaded end is equipped with a bending spring.
Technical specifications :
Inner tube : black NBR noir rubber conductor
Reinforcement : 2 textile plies
Recouvrement : caoutchouc synthétique
Outer finish : wrapped
Electrical resistance : less than 1 Mega Ω per meter
Temperature : - 30°C to 70°C
Production length: 50, 60 meters
Colour : black
Red tape marking : TECALEMIT - 403 - HYDROCARBONS - 16 BARS
Inlay marking : SEL - 403 35 - EN1360:2013 - TYPE 1 - 35 MM - 16 BARS - Ω - TRIM/AN - BATCH N°
| Part n° | Inner diameter | Outer diameter | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Pouce | mm | bar | bar | mm | kg/m | |
| * 403 32 | 32 | 1"1/4 | 45 | 16 | 48 | 175 | 1100 |
| * 403 35 | 35 | 1"3/8 | 48 | 16 | 48 | 175 | 1100 |
| 403 38 | 38 | 1"1/2 | 51 | 16 | 48 | 225 | 1235 |
| 403 40 | 40 | 1"9/16 | 53 | 16 | 48 | 225 | 1292 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
 | Ref 405 | |
 | DIN 73379 TYPE 1A | |
Hose 405 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
It complies with DIN 73379: 2013 version 1A
Its inner tube is antistatic and is available in coils for automobile garages and builders.
Technical specifications :
Inner tube : black antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CR rubber
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 50 meters
Colour : black
Particularity : antistatic
Marking : TECALEMIT - PART N° - DIN 73379 TYPE 1A - DIA. X THICKNESS - NBR/CR - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight |
| mm | mm | mm | bar | bar | mm | kg/m | |
| 405 4,5x10,5 | 4,5 | 10,5 | 3 | 10 | 30 | 45 | 0,09 |
| 405 5x11 | 5 | 11 | 3 | 10 | 30 | 50 | 0,10 |
| 405 6x12 | 6 | 12 | 3 | 10 | 30 | 60 | 0,10 |
| 405 7x13 | 7 | 13 | 3 | 10 | 30 | 70 | 0,12 |
| 405 7,5x13,5 | 7,5 | 13,5 | 3 | 10 | 30 | 70 | 0,12 |
| 405 8x14 | 8 | 14 | 3 | 10 | 30 | 80 | 0,13 |
| 405 9,5x15,5 | 9,5 | 15,5 | 3 | 10 | 30 | 80 | 0,14 |
| 405 12x19 | 12 | 19 | 3,5 | 10 | 30 | 100 | 0,20 |
| 405 17x24 | 17 | 24 | 3,5 | 10 | 30 | 125 | 0,32 |
Possible end-fittings : Threaded, CB range
See also 406, 407
| Ref 406 | |
 | DIN 73379 TYPE 2B | |
Hose 406 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
Its inner tube is antistatic.
Its hypalon outer cover allows use of this hose in 110°C continuous atmospheres with peaks up to 135°C.
This outer cover also has excellent resistance to aging and ozone effects.
Technical specifications :
Inner tube : black antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CSM
Outer finish : smooth
Temperature : - 30°C to + 90°C
Production lengths : 25 or 50 meters
Colour : black
Particularity : antistatic
Marking : TECALEMIT - PART N° - DIN 73379 TYPE 2B - DIA. X THICKNESS - NBR/CSM - BATCH N° - MONTH/YEAR
| Part n° | Inner diameterr | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight |
| mm | mm | mm | bar | bar | mm | kg/m | |
| 406 3,5x9,5 | 3,5 | 9,5 | 3 | 10 | 30 | 45 | 0.086 |
| 406 5x11 | 5 | 11 | 3 | 10 | 30 | 55 | 0.105 |
| 406 5,5x11,5 | 5,5 | 11,5 | 3 | 10 | 30 | 60 | 0.101 |
| 406 6x12 | 6 | 12 | 3 | 10 | 30 | 40 | 0.118 |
| 406 7,5x13,5 | 7,5 | 13,5 | 3 | 10 | 30 | 70 | 0.138 |
| 406 8x15 | 8 | 15 | 3 | 10 | 30 | 80 | 0.176 |
| 406 9x15 | 9 | 15 | 3 | 10 | 30 | 80 | 0.158 |
| 406 10x16 | 10 | 16 | 3 | 10 | 30 | 65 | 0.172 |
| 406 11,5x18,5 | 11,5 | 18,5 | 3.5 | 10 | 30 | 80 | 0.231 |
| 406 13x20 | 13 | 20 | 3.5 | 10 | 30 | 100 | 0.267 |
Possible end-fittings : Threaded, CB range
See also 404, 405, 407
 | Ref 411 |
 | |
Hose 411 is intended for suction and delivery of tar, bitumen and hot petroleum products.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius. it can be swaged with threaded fittings.
Technical specifications :
Inner tube : black synthetic rubber
Reinforcement : textile plies and metal spiral
Outer cover : abrasion and weather resistant microperforated CR / NBR rubber
Outer finish : wrapped
Temperature : +80°C
Production lengths : 40 meters
Electrical conductivity : 1 copper braid
Colour : black
Marking : TECALEMIT - PART N° - EMULSION DE BITUME 80°C - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Pression L.N.E | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 411 19 | 19 | 3/4" | 30 | 5,5 | 5 | 80 | 50 | 0,9 |
| 411 25 | 25 | 1" | 36,5 | 5,5 | 5 | 70 | 60 | 1,1 |
Possible end-fittings : Male threaded with male union 1”1/4, male threaded 3/4 with female union 1”1/4
 | Ref 416 | |
 | EN 13765 TYPE 2 | |
Hose 416 is intended for suction and delivery hydrocarbon whatever aromatic content.
Its exceptional flexibility and its extremely small radius makes it very handy.
Its resistance to vacuum is 0.9 bar.
Accordingly, it is installed on most tankers for delivery of oil at service stations.
It comes equipped with end-fittings (helical barbed tail) and two electrical coils providing the electrical conductivity.
This hose can be swaged with threaded fittings and supplied with certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
Technical specifications :
Inner tube : polypropylene film
Renforcement : Multiple polyester films between two helical turns in galvanized steel
Reinforcement : textile PVC coated
Outer finish : smooth with external metal protection spiral
Temperature : - 30° to + 100° c
Production lengths : 30 meters
Colour : black with red stripe
Marking : TECALEMIT - PART N° - PS BAR - (TRIMESTER/YEAR) - BATCH N°
| Part n° | Inner diameter | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Pouce | bar | bar | mm | kg/m | |
| * 416 GGE 14 40 | 38,1 | 1”1/2 | 14 | 70 | 105 | 1,8 |
| * 416 GGE 14 50 | 50 | 2” | 14 | 70 | 190 | 2,06 |
| * 416 GGE 14 65 | 63,5 | 2”1/2 | 14 | 70 | 225 | 2,7 |
| * 416 GGE 10 65 | 63,5 | 2”1/2 | 10 | 50 | 225 | 2,7 |
| * 416 GGE 14 75 | 76,2 | 3” | 14 | 70 | 290 | 3,5 |
| * 416 GGE 10 75 | 76,2 | 3” | 10 | 50 | 290 | 3,5 |
| * 416 GGE 14 100 | 101,6 | 4” | 14 | 70 | 320 | 5,44 |
| * 416 GGE 10 100 | 101,6 | 4” | 10 | 50 | 320 | 5,44 |
| 416 GGE 14 150 | 152 | 6 | 14 | 70 | 497 | 11,9 |
| 416 GGE 14 200 | 203 | 8 | 14 | 70 | 740 | 21,5 |
| 416 GGE 14 250 | 254 | 10 | 14 | 70 | 920 | 25 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Guillemin, Camlock, Flanges, BSP
 | Ref 441 |
 | |
Semi-lay flat hose 441 is intended for suction and deliver fuels at a pressure of 10 bar.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
Technical specifications :
Inner tube : black nitrile NBR rubber
Renforcement : textile plies
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : -40° to +70°c maximum
Production lengths : 40 meters
Colour : black
Marking : TECALEMIT - PART N° - REFOULEMENT HYDROCARBURES 10 BAR - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Pression L.N.E | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 441 19 | 19 | 3/4 | 32 | 6,5 | 10 | 30 | 90 | 0,53 |
| 441 25 | 25,4 | 1” | 35 | 4,8 | 10 | 30 | 254 | 0,60 |
| 441 32 | 32 | 1”1/4 | 47 | 5 | 10 | 30 | 320 | 0,74 |
| 441 38 | 38 | 1”1/2 | 48 | 5 | 10 | 30 | 380 | 0,83 |
| 441 40 | 40 | 1"9/16 | 56 | 8 | 10 | 30 | 380 | 0,9 |
| 441 44 | 44,5 | 1”3/4 | 55 | 5,25 | 10 | 30 | 445 | 1,0 |
| 441 50 | 50,8 | 2” | 62 | 5,6 | 10 | 30 | 510 | 1,23 |
| 441 63 | 63,5 | 2”1/2 | 75 | 5,75 | 10 | 30 | 635 | 1,60 |
| 441 75 | 76,2 | 3” | 88 | 5,9 | 10 | 30 | 762 | 1,89 |
| 441 90 | 90 | 3”1/2 | 104 | 7 | 10 | 30 | 900 | 2,72 |
| 441 100 | 101,6 | 4” | 116 | 7,2 | 10 | 30 | 1016 | 3,19 |
| 441 127 | 127 | 5” | 143 | 8 | 10 | 30 | 1270 | 4,32 |
| 441 150 | 152,4 | 6” | 168 | 7,8 | 10 | 30 | 1524 | 5,05 |
Possible end-fittings : Threaded, Guillemin, Tankwagen, Flange, Storz
 | Ref 443A - 443M | |
 | 443 T | |
 | 443 M | |
The hose 443 is intended for the equipment of petrol pumps for diesel, biofuels, standard gasoline , ”super” as well as unleaded gasoline.
The 443T version has a textile reinforcement and complies with EN 1360 type 1.
The 443M version has a metal braid and complies with EN 1360 type 3.
The hose is available in different colors and with a conductive tube of
electricity (resistance to the meter less than 1 Ω m).
Technical specifications :
Inner tube : NBR black
Reinforcement : Textile braid (443T)
Steel braid (443M)
Outer cover : Oil-resistant and weather-resistant rubber
Outer finish : Smooth or wrapped
Temperature : -30°C to +55°C (on request -54°C to +85°C)
Production lengths : variables
Colour : black, green, red or blue
Marking : TECALEMIT - PART N° - EN1360: 2013 - TYPE (1 or 3) - Ω - Ø - WP 16 BARS - (QUARTER / YEAR) - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| Inch | mm | mm | bar | bar | bar | mm | Kg/m | |
| 443T 13 | 12,7 | 1/2” | 21,5 | 4,5 | 16 | 48 | 60 | 0,295 |
| 443T 16 | 16 | 5/8” | 26 | 5 | 16 | 48 | 80 | 0,425 |
| 443T 19 | 19 | 3/4” | 29 | 5 | 16 | 48 | 100 | 0,475 |
| 443T 25 | 25,4 | 1” | 36,5 | 5,5 | 16 | 48 | 150 | 0,69 |
| Part n° | Inner diameter | Outer diameter | Pression de service | Working pressure | Burst pressure | Bend radius | Weight | |
| Inch | mm | mm | bar | bar | bar | mm | Kg/m | |
| 443M 13 | 12,7 | 1/2” | 21,5 | 4,5 | 16 | 48 | 60 | 0,385 |
| 443M 16 | 16 | 5/8” | 26 | 5 | 16 | 48 | 80 | 0,525 |
| 443M 19 | 19 | 3/4” | 29 | 5 | 16 | 48 | 100 | 0,595 |
| 443M 25 | 25,4 | 1” | 36,5 | 5,5 | 16 | 48 | 150 | 0,86 |
 | Ref 462 |
 | |
Hose 462 is particularly appreciated by industrial site maintenance services.
It accepts hot glycol water, compressed air, oil and hydrocarbons up to 40% aromatic content.
It has static electricity conductiveness.
Its reinforcement and thickness give it excellent bend radius.
Technical specifications :
Inner tube : antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C max
Production lengths : 25 or 50 meters
Colour : black
Marking : TECALEMIT - PART N° - MULTIPURPOSE HOSE - ANTISTATIC - PS/WP 25/350PSI - DN (MM/INCH) - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Pression L.N.E | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 462 6x14 | 6 | 1/4” | 14 | 4 | 25 | 85 | 20 | 0.16 |
| 462 8x16 | 8 | 5/16” | 16 | 4 | 25 | 85 | 25 | 0.21 |
| 462 10x18 | 10 | 3/8” | 18 | 4 | 25 | 85 | 30 | 0.26 |
| 462 13x21 | 13 | 1/2” | 21 | 4 | 25 | 85 | 45 | 0.33 |
| 462 16x25 | 16 | 5/8” | 25 | 4.5 | 25 | 85 | 65 | 0.40 |
| 462 19x29 | 19 | 3/4” | 29 | 5 | 25 | 85 | 100 | 0.55 |
| 462 25x35 | 25 | 1” | 35 | 5 | 25 | 85 | 180 | 0.60 |
Possible end-fittings : Threaded, CB range
See also 461, 362, 405
 | Ref 470 | |
 | EN 1765 TYPE S15 | |
This hose is used for the loading and unloading of tankers.
It complies with 1765 type S10 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.
Technical specifications :
Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths 60 meters maximum until 6’’, 40 meters maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : TECALEMIT - PART N°- EN 1765 TYPE S10 - DIA. - BATCH N°
| Part n° | Inner diameter | Outer diameter | Working pressure | Burst pressure | Negative pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 470 50 | 2’’ | 50,8 | 72 | 10 | 40 | - 0,92 | 200 | 3,5 |
| 470 75 | 3’’ | 76,2 | 100 | 10 | 40 | - 0,92 | 400 | 5,56 |
| 470 100 | 4’’ | 101,6 | 129 | 10 | 40 | - 0,92 | 500 | 7,97 |
| 470 125 | 5’’ | 127 | 162 | 10 | 40 | - 0,92 | 650 | 14,07 |
| 470 150 | 6’’ | 152,4 | 190 | 10 | 40 | - 0,92 | 750 | 17,325 |
| 470 200 | 8’’ | 203 | 243 | 10 | 40 | - 0,92 | 950 | 24,15 |
| 470 250 | 10’’ | 254 | 302 | 10 | 40 | - 0,92 | 1200 | 38,63 |
| 470 300 | 12’’ | 305,8 | 356 | 10 | 40 | - 0,92 | 1500 | 48,5 |
| 470 350 | 14’’ | 355,6 | 408 | 10 | 40 | - 0,92 | 2150 | 60 |
| 470 400 | 16’’ | 406 | 460 | 10 | 40 | - 0,92 | 2800 | 72,5 |
Possible end-fittings : Flanges
| Ref 471 | |
| EN 1765 TYPE S15 | |
This hose is used for the loading and unloading of tankers.
It complies with 1765 type S15 and is usually fitted with circular flanges, as per EN 1759 class 150 or class 300.
Technical specifications :
Inner tube : abrasion and weather resistant NBR rubber
Reinforcement : high tensile synthetic textile, steel wire helix and antistatic copper wire.
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber.
Outer finish : wrapped
Temperature : -30° to + 82° c maximum
Production lengths : 60 meters maximum until 6’’, 40 meters maximum of 8 " and 10 ", 12 metres maximum until 16 "
Colour : black
Marking : TECALEMIT - PART N°- EN 1765 TYPE S15 - DIA. - BATCH N°
| Part n° | Inner diameter | Outer diameter | working pressure | Burst pressure | Negative pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 471 50 | 2’’ | 50,8 | 74 | 15 | 60 | - 0,92 | 200 | 3,9 |
| 471 75 | 3’’ | 76,2 | 104 | 15 | 60 | - 0,92 | 400 | 6,15 |
| 471 100 | 4’’ | 101,6 | 134 | 15 | 60 | - 0,92 | 500 | 9,35 |
| 471 125 | 5’’ | 127 | 162 | 15 | 60 | - 0,92 | 650 | 13,75 |
| 471 150 | 6’’ | 152,4 | 190 | 15 | 60 | - 0,92 | 750 | 17,45 |
| 471 200 | 8’’ | 203 | 245 | 15 | 60 | - 0,92 | 950 | 25,00 |
| 471 250 | 10’’ | 254 | 303 | 15 | 60 | - 0,92 | 1200 | 38,250 |
| 471 300 | 12’’ | 305,8 | 362 | 15 | 60 | - 0,92 | 1500 | 50,75 |
| 471 350 | 14’’ | 355,6 | 416 | 15 | 60 | - 0,92 | 2150 | 65,225 |
| 471 400 | 16’’ | 406 | 479 | 15 | 60 | - 0,92 | 2800 | 82,25 |
Possible end-fittings : Flanges
 | Ref 489 | |
 | EN 1361 TYPE B | |
The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type B standard.
Technical specifications :
Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement : high tensile synthetic textile and 2 antistatic copper wire
Outer cover: abrasion,ozone,weather,heat and oil resistant special synthetic rubber
Production lengths : 40 & 60 meters
Temperature : -30°C to +65°C
Electrical conductivity : < = 106 Ω/m
Outer finish : smooth
Colour : black
Marking : TECALEMIT - PART N° - EN 1361 TYPE B - Ω -PS 20 BARS - DN (MM/INCH) - BATCH N°
| Part n° | Inner diameter | Outer diameter | Working pressure | Test pressure | Min. burst pressure | Bend radius | Weight | |
| mm | Inch | mm | bar | bar | bar | mm | Kg/m | |
| 489 19 | 3/4” | 19 | 29 | 20 | 40 | 80 | 113 | 0,522 |
| 489 25 | 1” | 25,4 | 38 | 20 | 40 | 80 | 150 | 0,842 |
| 489 32 | 1”1/4 | 32 | 45 | 20 | 40 | 80 | 200 | 1,003 |
| 489 38 | 1”1/2 | 38 | 51 | 20 | 40 | 80 | 230 | 1,162 |
| 489 50 | 2” | 50,8 | 65 | 20 | 40 | 80 | 305 | 1,699 |
| 489 65 | 2”1/2 | 63,5 | 79 | 20 | 40 | 80 | 390 | 2,063 |
| 489 75 | 3” | 76,2 | 92 | 20 | 40 | 80 | 460 | 2,562 |
| 489 100 | 4” | 101,6 | 120 | 20 | 40 | 80 | 610 | 3,734 |
 | Ref 491 |
 | |
Intended for suction and discharge of hydrocarbons, hose 491 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
This versatile hose, available in many diameters, can be cut to order.
This hose can be built in several variants, with corrugated flat, corrugated or crenellated coating as well as with an operating temperature of -55 ° C to + 80 ° C.
Technical specifications :
Inner tube : black NBR nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C max
Production lengths : 20 meters
Colour : black
Marking : Tecalemit - REF 491 - aspiration refoulement hydrocarbures 10 bar - production date or batch
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 491 19 | 19 | 3/4” | 32 | 6.5 | 10 | 80 | 120 | 0.9 |
| 491 25 | 25,4 | 1” | 38 | 6.5 | 10 | 70 | 150 | 1.0 |
| 491 28 | 28 | 1"1/8 | 41 | 65 | 10 | 30 | 170 | 1.0 |
| 491 30 | 30 | 1” 3/16 | 43 | 6.5 | 10 | 60 | 190 | 1.1 |
| 491 32 | 31,8 | 1” 1/4 | 45 | 6.5 | 10 | 60 | 200 | 1.1 |
| 491 35 | 35 | 1” 3/8 | 48 | 6.5 | 10 | 50 | 220 | 1.1 |
| 491 38 | 38,1 | 1” 1/2 | 52 | 7 | 10 | 50 | 250 | 1.2 |
| 491 40 | 40 | 1” 9/16 | 54 | 7 | 10 | 40 | 280 | 1.3 |
| 491 42 | 42 | 1” 21/32 | 56 | 7 | 10 | 40 | 300 | 1.3 |
| 491 45 | 45 | 1”3/4 | 57 | 6 | 10 | 40 | 300 | 1.4 |
| 491 50 | 50,8 | 2” | 64 | 7 | 10 | 40 | 300 | 1.7 |
| 491 55 | 55 | 2"3/16 | 69 | 7 | 10 | 30 | 310 | 1.8 |
| 491 60 | 60 | 2” 3/8 | 74 | 7 | 10 | 30 | 320 | 2.0 |
| 491 65 | 63,5 | 2” 1/2 | 77 | 7 | 10 | 30 | 540 | 2.5 |
| 491 70 | 70 | 2” 3/4 | 84 | 7 | 10 | 30 | 570 | 2.8 |
| 491 75 | 76,2 | 3” | 90 | 7 | 10 | 30 | 600 | 2.9 |
| 491 80 | 80 | 3"5/32 | 95 | 7.5 | 10 | 30 | 700 | 3.2 |
| 491 90 | 90 | 3” 1/2 | 104 | 7 | 10 | 30 | 720 | 3.6 |
| 491 100 | 101,6 | 4” | 116 | 7 | 10 | 30 | 800 | 4.1 |
| 491 110 | 110 | 4” 11/32 | 127 | 8.5 | 10 | 30 | 890 | 5.3 |
| 491 114 | 114,3 | 4” 1/2 | 131 | 8.5 | 10 | 30 | 940 | 5.8 |
| 491 120 | 120 | 4” 23/32 | 138 | 9 | 10 | 30 | 980 | 6.0 |
| 491 125 | 127 | 5” | 145 | 9 | 10 | 30 | 1100 | 6.2 |
| 491 140 | 139,7 | 5” 1/2 | 158 | 9 | 10 | 30 | 1250 | 7.4 |
| 491 150 | 152,4 | 6” | 172 | 10 | 10 | 30 | 1500 | 7.7 |
| 491 160 | 160 | 182 | 11 | 10 | 30 | 1700 | 9.0 | |
| 491 200 | 203,2 | 8” | 230 | 14 | 10 | 30 | 2000 | 12.5 |
Possible end-fittings : Threaded, Guillemin, Tankwagen, Flange, storz
See also 492
 | Ref 492 |
 | |
Hose 492 is intended for suction of oil on hydraulic powerpacks.
Economic, it can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
For diameters 19, 25, 32, 38, 50, 63, 76, 100, it complies with the SAE J517 version 100R4 standard which applies to suction hoses for hydraulic oils.
Technical specifications
Inner tube : black nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +70°C max
Production lengths : 40 meters
Colour : black
Marking : Tecalemit - part N° - dia. - batch N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 492 19 | 19 | 3/4” | 29 | 5.5 | 5 | 15 | 130 | 0.70 |
| 492 25 | 25 | 1” | 37 | 6 | 5 | 15 | 180 | 0.80 |
| 492 30 | 30 | 1”3/16 | 41 | 5.5 | 5 | 15 | 210 | 0.91 |
| 492 32x45 | 32 | 1”1/4 | 44,5 | 6.25 | 5 | 15 | 230 | 1.0 |
| 492 35 | 35 | 1”3/16 | 46 | 5.5 | 5 | 15 | 245 | 1.10 |
| 492 38 | 38 | 1”1/2 | 52 | 7 | 5 | 15 | 270 | 1.2 |
| 492 40 | 40 | 1”9/16 | 51 | 5.5 | 5 | 15 | 280 | 1.28 |
| 492 42 | 42 | 1”21/32 | 53 | 5.5 | 5 | 15 | 295 | 1.32 |
| 492 45 | 45 | 1”3/4 | 56 | 5.5 | 5 | 15 | 315 | 1.40 |
| 492 48 | 48 | - | 60 | 6 | 5 | 15 | 325 | 1.50 |
| 492 50 | 50,8 | 2” | 63,2 | 5.5 | 5 | 15 | 350 | 1.60 |
| 492 55 | 55 | - | 66 | 5.5 | 5 | 15 | 380 | 1.90 |
| 492 60 | 60 | 2”3/8 | 72 | 6 | 5 | 15 | 420 | 2.30 |
| 492 63 | 63,5 | 2”1/2 | 75 | 6 | 5 | 15 | 450 | 2.50 |
| 492 70 | 70 | 2”3/4 | 82 | 6 | 5 | 15 | 500 | 2.80 |
| 492 76 | 76 | 3” | 89 | 6.5 | 5 | 15 | 550 | 3.10 |
| 492 80 | 80 | 3”5/32 | 93 | 6.5 | 5 | 15 | 600 | 3.50 |
| 492 90 | 90 | 3”1/2 | 103 | 6.5 | 5 | 15 | 650 | 3.90 |
| 492 100 | 101,6 | 4” | 113 | 6.5 | 5 | 15 | 690 | 4.30 |
Possible end-fittings : Threaded
See also 491
 | Ref 494 | |
 |  ISO 15541 | |
The hose 494 is intended for the transfer of hydrocarbons in the off-shore environment when fire resistance is required.
Anti-corrosion steel reinforcement.
Neoprene outer cover ensures excellent resistance to ozone, oils and abrasion.
Flame resistant according to MSHA standard and fire resistant according to ISO15541 (30 minutes - 800°C).
In 2016, it was the subject, in diameter 50 and 150, type approval from the Bureau Veritas Marine and Off-shore division for the transfer to 13 bars of water, sea water, hydrocabures, oil and hydraulic oil.
Technical specifications :
Inner tube : smooth black NBR rubber
Reinforcement : 2 or 4 metal wire spirals
Outer cover : CR flame-extinguishing
Outer finish : fine tape-wrapped
Temperature : -40°C to +70°C
Production lengths : 60 meters
Colour : black
Marking Tecalemit by SEL - Part N°- Résistant au feu - ISO 15541 - MSHA - Marking
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 494 50 | 50,8 | 2 | 69 | 9 | 30 | 160 | 225 | 2,5 |
| 494 75 | 76,2 | 3 | 94 | 9 | 30 | 160 | 380 | 4,5 |
| 494 100 | 101,6 | 4 | 122 | 10 | 30 | 160 | 510 | 6,7 |
| 494 125 | 127 | 5 | 149 | 11 | 30 | 160 | 720 | 8,0 |
| 494 150 | 152,4 | 6 | 176 | 12 | 30 | 160 | 800 | 10,75 |
Possible end-fittings : Breakaway, NPT male, Flanges, Todo
 | Ref 495 | |
 | NF EN 1761 TYPE SD | |
Intended for suction and discharge of hydrocarbons, hose 495 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is intended for the delivery of oil by truck - tank.
It meets NF EN 1761 type SD (suction and delivery) standard.
this hose can be swaged with guillemin end-fittings and supplied with TMD modificate (29/05/09) test certificate for which we have a flexible type approval.
Technical specifications :
Inner tube : black nitrile NBR rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 2 copper braid (< 106Ω/m)
Outer finish : wrapped
Temperature : -40°C to +70°C
Production lengths : 40 meters
Colour : black
Red tape marking : TECALEMIT - Part N° - HYDROCARBURES 10 BARS
Inlay marking : TECALEMIT - REFERENCE - HYDROCARBURES 10 BARS - EN 1761 : 1999 SD (Ø) - PMS10 - Ω/M - CL
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 495 70 | 70 | 2” 3/4 | 84 | 7 | 10 | 48 | 300 | 2,8 |
| * 495 75 | 75 | 3” | 91 | 7,5 | 10 | 48 | 350 | 2,6 |
| * 495 90 | 90 | 3” 1/2 | 106 | 8 | 10 | 48 | 400 | 4,2 |
| * 495 100 | 101,6 | 4” | 118 | 8 | 10 | 48 | 450 | 5,8 |
| * 495 120 | 120 | 4”3/4 | 138 | 9 | 10 | 40 | 600 | 5,1 |
| * 495 125 | 127,4 | 5” | 146 | 10 | 10 | 40 | 635 | 5,8 |
| * 495 150 | 152,4 | 6” | 175 | 11,5 | 10 | 48 | 750 | 9,0 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Threaded, Guillemin, Tankwagen, Flange, Storz
| Ref 496 | |
 | EN 1361 TTPE C | |
The 496 hoses is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type c standard.
Technical specifications :
Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile braid.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths : 40 & 60 meters.
Temperature: -30°C to 65°C.
Electrical conductivity: < = 106/m.
Outer finish : smooth.
Colour : black.
Marking : TECALEMIT - PART N° - EN 1361 TYPE C - Ω -PS 20 BARS - DN (MM/INCH) - BATCH N°.
| Part n° | Inner diameter | Outer diameter | Working pressure | Test pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | bar | bar | bar | mm | Kg/m | |
| 496 19 | 3/4” | 19 | 29 | 20 | 40 | 80 | 113 | 0,522 |
| 496 25 | 1” | 25,4 | 38 | 20 | 40 | 80 | 150 | 0,840 |
| 496 32 | 1”1/4 | 32 | 45 | 20 | 40 | 80 | 200 | 1,000 |
| 496 38 | 1”1/2 | 38 | 51 | 20 | 40 | 80 | 230 | 1,155 |
| 496 50 | 2” | 50,8 | 65 | 20 | 40 | 80 | 305 | 1,710 |
| 496 65 | 2”1/2 | 63,5 | 79 | 20 | 40 | 80 | 390 | 2,070 |
| 496 75 | 3” | 76,2 | 92 | 20 | 40 | 80 | 460 | 2,580 |
| 496 100 | 4” | 101,6 | 120 | 20 | 40 | 80 | 610 | 3,760 |
| Ref 498 | |
 | EN 1361 TYPE E | |
The 489 hose is especially conceived for the ground refuelling of aircrafts having an aromatic content up to 50 %.
It meets EN 1361 type E standard.
This hose can be produced with a thermoplastic spiral.
Technical specifications :
Inner tube: aviation gasolines and jet fuels resistant,conductive NBR rubber.
Reinforcement: high tensile synthetic textile, 2 steel wire helix and 2 antistatic copper wire.
Outer cover: abrasion, ozone, weather, heat and oil resistant special synthetic rubber.
Production lengths: 40 & 60 meters.
Temperature: -30°C to 65°C.
Electrical conductivity : < = 106/m.
Outer finish: smooth.
Colour: black.
Marking : TECALEMIT - PART N° - EN 1361 TYPE E - Ω -PS 20 BARS - DN (MM/INCH) - BATCH N°
| Part n° | Inner diameter | Outer diameter | Working pressure | Test pressure | Burst pressure | Negative pressure | Bend radius | Weight | |
| mm | Inch | mm | bar | bar | bar | bar | mm | Kg/m | |
| 498 19 | 3/4” | 19 | 31 | 20 | 40 | 80 | -0,92 | 85 | 0,686 |
| 498 25 | 1” | 25,4 | 39 | 20 | 40 | 80 | -0,92 | 115 | 0,972 |
| 498 32 | 1”1/4 | 32 | 46 | 20 | 40 | 80 | -0,92 | 150 | 1,218 |
| 498 38 | 1”1/2 | 38 | 53 | 20 | 40 | 80 | -0,92 | 180 | 1,592 |
| 498 50 | 2” | 50,8 | 67 | 20 | 40 | 80 | -0,92 | 250 | 2,320 |
| 498 65 | 2”1/2 | 63,5 | 81 | 20 | 40 | 80 | -0,92 | 325 | 2,860 |
| 498 75 | 3” | 76,2 | 95 | 20 | 40 | 80 | -0,92 | 400 | 3,701 |
| 498 100 | 4” | 101,6 | 123 | 20 | 40 | 80 | -0,92 | 550 | 5,166 |
