Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Rubber hoses for hazardous materials
 | 401 |
 Ø 19 | |
 Ø 25 / Ø 50 | |
 Ø 38 / Ø 50 / Ø 63 | |
Intended for suction and delivery of tar, bitumen and hot petroleum products, hose 401 has excellent resistance to ozone and bituminous products thanks to the quality of its covering.
The hose structure is protected from heat by a fibreglass interlayer and it has a low bend radius.
It can be supplied equipped with half-symetrical, threaded or flange fittings along and deliver certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
- In Ø 19, Its reinforcement consists of two metal wire spirals.
- In Ø 25 is protected by an external metal spiral and produced in predetermined lengths with flexible cuff-ends.
- In Ø 38, 50 and 63 have a smooth outer cover and can be cropped to length.
- In Ø 50, we offer a variant identical to Ø 25.
Technical specifications :
Inner tube : smooth black synthetic rubber
Reinforcement : fibreglass protection, textile plies and metal spiral
Outer cover : abrasion and weather resistant CR / NBR rubber
Outer finish :
- Ø19, Ø 38, Ø 50 et Ø 63 : smooth
- Ø 25 : corrugated (external metal protection spiral for Ø 25 and 50)
Temperature : + 180°C max
Production lengths : 40 meters. Ø 25 : 5, 8, 15 meters
Electrical conductivity : 1 copper braid or external spiral
Colour : black
Particularities : oversized cuff-ends Ø 25, 50
Marking : TECALEMIT - PART N° - BITUMEN 180°C - PS 10 BARS - BATCH N°
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| * 401 19 | 19 | 3/4” | 32 | 6,5 | 10 | 40 | 130 | 1,00 |
| * 401 25 | 25,4 | 1” | 43 | 8,5 | 10 | 40 | 200 | 1,30 |
| * 401 38 | 38,1 | 1”1/2 | 56 | 9 | 10 | 40 | 260 | 1,89 |
| * 401 50 | 50,8 | 2” | 70 | 10 | 10 | 40 | 300 | 2,60 |
| * 401 63 | 63,5 | 2”1/2 | 81 | 9 | 10 | 40 | 400 | 3,00 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Male threaded, Guillemin
See also 402, 411
 | 403 | |
 |  EN 1360 : 2013 | |
The hose 403 is intended for the equipment of the reels of the fuel distribution tankers.
Manufactured in accordance with the EN 1360: 2013 standard, in the lightest possible way, it has a very thin striped rubber coating very resistant to abrasion.
We deliver it fitted with male or female male or female BSPP fittings 1''1/2 in steel and certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
The male threaded end is equipped with a bending spring.
Technical specifications :
Inner tube : black NBR noir rubber conductor
Reinforcement : 2 textile plies
Recouvrement : caoutchouc synthétique
Outer finish : wrapped
Electrical resistance : less than 1 Mega Ω per meter
Temperature : - 30°C to 70°C
Production length: 50, 60 meters
Colour : black
Red tape marking : TECALEMIT - 403 - HYDROCARBONS - 16 BARS
Inlay marking : SEL - 403 35 - EN1360:2013 - TYPE 1 - 35 MM - 16 BARS - Ω - TRIM/AN - BATCH N°
| Part n° | Inner diameter | Outer diameter | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Pouce | mm | bar | bar | mm | kg/m | |
| * 403 32 | 32 | 1"1/4 | 45 | 16 | 48 | 175 | 1100 |
| * 403 35 | 35 | 1"3/8 | 48 | 16 | 48 | 175 | 1100 |
| 403 38 | 38 | 1"1/2 | 51 | 16 | 48 | 225 | 1235 |
| 403 40 | 40 | 1"9/16 | 53 | 16 | 48 | 225 | 1292 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
 | 416 | |
 | EN 13765 TYPE 2 | |
Hose 416 is intended for suction and delivery hydrocarbon whatever aromatic content.
Its exceptional flexibility and its extremely small radius makes it very handy.
Its resistance to vacuum is 0.9 bar.
Accordingly, it is installed on most tankers for delivery of oil at service stations.
It comes equipped with end-fittings (helical barbed tail) and two electrical coils providing the electrical conductivity.
This hose can be swaged with threaded fittings and supplied with certificates in accordance with Appendix IV-1 of the amended TDG Order of May 29 2009.
Technical specifications :
Inner tube : polypropylene film
Renforcement : Multiple polyester films between two helical turns in galvanized steel
Reinforcement : textile PVC coated
Outer finish : smooth with external metal protection spiral
Temperature : - 30° to + 100° c
Production lengths : 30 meters
Colour : black with red stripe
Marking : TECALEMIT - PART N° - PS BAR - (TRIMESTER/YEAR) - BATCH N°
| Part n° | Inner diameter | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Pouce | bar | bar | mm | kg/m | |
| * 416 GGE 14 40 | 38,1 | 1”1/2 | 14 | 70 | 105 | 1,8 |
| * 416 GGE 14 50 | 50 | 2” | 14 | 70 | 190 | 2,06 |
| * 416 GGE 14 65 | 63,5 | 2”1/2 | 14 | 70 | 225 | 2,7 |
| * 416 GGE 10 65 | 63,5 | 2”1/2 | 10 | 50 | 225 | 2,7 |
| * 416 GGE 14 75 | 76,2 | 3” | 14 | 70 | 290 | 3,5 |
| * 416 GGE 10 75 | 76,2 | 3” | 10 | 50 | 290 | 3,5 |
| * 416 GGE 14 100 | 101,6 | 4” | 14 | 70 | 320 | 5,44 |
| * 416 GGE 10 100 | 101,6 | 4” | 10 | 50 | 320 | 5,44 |
| 416 GGE 14 150 | 152 | 6 | 14 | 70 | 497 | 11,9 |
| 416 GGE 14 200 | 203 | 8 | 14 | 70 | 740 | 21,5 |
| 416 GGE 14 250 | 254 | 10 | 14 | 70 | 920 | 25 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Guillemin, Camlock, Flanges, BSP
 | 495 | |
 | NF EN 1761 : 1999 SD | |
Intended for suction and discharge of hydrocarbons, hose 495 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is intended for the delivery of oil by truck - tank.
It meets NF EN 1761 type SD (suction and delivery) standard.
this hose can be swaged with guillemin end-fittings and supplied with TMD modificate (29/05/09) test certificate for which we have a flexible type approval.
Technical specifications :
Inner tube : black nitrile NBR rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 2 copper braid (< 106Ω/m)
Outer finish : wrapped
Temperature : -40°C to +70°C
Production lengths : 40 meters
Colour : black
Red tape marking : TECALEMIT - Part N° - HYDROCARBURES 10 BARS
Inlay marking : TECALEMIT - REFERENCE - HYDROCARBURES 10 BARS - EN 1761 : 1999 SD (Ø) - PMS10 - Ω/M - CL
| Part n° | Inner diameter | Outer diameter | Wall thickness | Working pressure | Burst pressure | Bend radius | Weight | |
| mm | Inch | mm | mm | bar | bar | mm | kg/m | |
| 495 70 | 70 | 2” 3/4 | 84 | 7 | 10 | 48 | 300 | 2,8 |
| * 495 75 | 75 | 3” | 91 | 7,5 | 10 | 48 | 350 | 2,6 |
| * 495 90 | 90 | 3” 1/2 | 106 | 8 | 10 | 48 | 400 | 4,2 |
| * 495 100 | 101,6 | 4” | 118 | 8 | 10 | 48 | 450 | 5,8 |
| * 495 120 | 120 | 4”3/4 | 138 | 9 | 10 | 40 | 600 | 5,1 |
| * 495 125 | 127,4 | 5” | 146 | 10 | 10 | 40 | 635 | 5,8 |
| * 495 150 | 152,4 | 6” | 175 | 11,5 | 10 | 48 | 750 | 9,0 |
* In accordance with Appendix IV.1 of the modified TMD Order of May 29, 2009
Possible end-fittings : Threaded, Guillemin, Tankwagen, Flange, Storz