Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Coupling for compressed air : Express couplings & Air King couplings
Symmetrical rapid-lock quarter-turn couplings, comprising different rear parts depending on where they are intended to be installed.
Fluted Express coupling, female threaded Express, male threaded, swivel connection, Hose connection with safety collar, rubber gasket, clamping jaw, safety pin and female jonction
- European-type.
- American-type.
Warning concerning couplings intended for gaseous fluids
We would like to insist on the need to make a perfectly suitable choice of couplings and locking collars/rings on the compressed air pipe concerned.
In fact, as the fluid is compressed by definition, the damage if the hose breaks is much greater than that caused by a fault on a hose transporting an incompressible fluid.
You can compare the breakage of a hose under pressure to compressed gas during an explosion.
Express couplings sizes :
Slide
 | ||||||
Key : |
Grooved sockets
 |
| Table 1 – Dimensions of (grooved) sockets for polyamide tubes | |||||
| Inside hose diameter (mm) | 6 | 7,5 | 8 | 10 | 12 |
| Dimension A (mm) | 4 | 6 | 6 | 8 | 10 |
NOTE: The dimensions of polyamide tubes are specified in NF E 49-100 | |||||
| Table 1 – Dimensions of (grooved) sockets for hoses based on rubber or thermoplastic materials. | ||||||||
| DN (mm) | 6,3 | 8 | 10 | 12,5 | 16 | 19 | 20 | 25 |
| Dimension A (mm) | 4 | 6 | 8 | 10 | 12 | 15 | 15 | 21 |
The class B external cylindrical threads comply with NF EN ISO 228-1:2003. | ||||||||
Nipple
 | ||||||
The class B external cylindrical threads comply with NF EN ISO 228-1:2003 |
| Thraed (mm) | /2 (mm) | D(mm) | Recommended width across flats(mm) |
| G 1/4 B | 9 | 8 | 17 |
| G 3/8 B | 9 | 9,5 | 22 |
| G 1/2 B | 11 | 12,5 | 27 |
| G 3/4 B | 12 | 18 | 32 |
| G 1 B | 14 | 23,5 | 36 |
| G 1 1/4 B | 16 | 32 | 46 |
Sleeves
 | ||||||
The class B internal cylindrical threads comply with NF EN ISO 228-1:2003. 1: Optional groove |
| Thread (mm) | /3 (mm) | M max (mm) | Recommended width across flats (mm) |
| G 1/4 | 9 | 8 | 17 |
| G 3/8 | 10,1 | 12 | 22 |
| G 1/2 | 13,2 | 15 | 27 |
| G 3/4 | 14,5 | 21 | 32 |
| G 1 | 16,8 | 25 | 36 |
| G 1 1/4 | 19,1 | 25 | 46 |
Gasket type A
 |
Gasket type B
 |
Express couplings : European-type
This coupling has a machined socket with non-aggressive locking for pipe tubes, a fastening neck for fitting a handle collar as well as a catch on this neck to prevent the collar from being turned.
There is no need to use a wrench to connect the pipework.
The distance between the handles is 41mm, sealing is done by a seal, which may have a large hole (water application) or a small hole (air application).
Fluted express
Fluted Express coupling
| Fluted Express coupling with gaskett |
Heavy series - French norm
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41 mm).
Works with all fittings based on the same standard.
Safety collar with stop to be assembled with hose clamps with safety claws. Pressure : PN 10
Bar Temperature : 0°C/+70°C
Matérial : forged brass, NBR lip seal type A (bore Ø15)
| Part N° | Ø | Packaging |
| 1509.403 | 9 | 25 |
| 1509.405 | 11 | 25 |
| 1509.406 | 13 | 25 |
| 1509.408 | 16 | 20 |
| 1509.410 | 19 | 15 |
| 1509.412 | 22 | 15 |
| 1509.414 | 25 | 15 |
| 1509.510 | 30-32 | 10 |
 | Fluted Express coupling without gaskett |
Heavy series - French norm
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41mm).
Works with all fittings based on the same standard.
Safety collar with stop to be assembled with hose clamps with safety claws.
Pressure : PN 10
Bar temperature : 0°C/+70°C
Material : forged brass
| Part N° | Ø | Packaging |
| 2007100000900 | 9 | 25 |
| 2007100001100 | 11 | 25 |
| 2007100001300 | 13 | 25 |
| 2007100001600 | 16 | 20 |
| 2007100001900 | 19 | 15 |
| 2007100002200 | 22 | 15 |
| 2007100002500 | 25 | 15 |
| 2007100003000 | 30-32 | 10 |
Female threaded
Female threaded Express coupling
 | Female threaded Express coupling with gasket |
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41mm).
Works with all fittings based on the same standard.
Female thread ISO 228-1
Pressure : PN10
Bar Temperature : 0°C/+70°C
Material : forged brass, NBR lip seal type A (bore Ø15)
| Part N° | Ø | Packaging |
| 1527.492 | 1/4" | 20 |
| 1527.491 | 3/8" | 25 |
| 1527.472 | 1/2" | 25 |
| 1527.473 | 3/4" | 20 |
| 1527.494 | 1" | 20 |
| 1527.475 | 1"1/4 | 15 |
 | Female threaded Express coupling without gasket |
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41mm).
Works with all fittings based on the same standard.
Female thread ISO 228-1
Pressure : PN10
Bar Temperature : 0°C/+70°C
Material : forged brass
| Part N° | Ø | Packaging |
| 2007110000800 | 1/4" | 20 |
| 2007110001200 | 3/8" | 25 |
| 2007110001500 | 1/2" | 25 |
| 2007110002000 | 3/4" | 20 |
| 2007110002600 | 1" | 20 |
| 2007110003300 | 1"1/4 | 15 |
Male threaded
Male threaded Express coupling
 | Male threaded Express coupling without gasket |
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41mm).
Works with all fittings based on the same standard.
Male threaded ISO 228-1
Pressure : PN 10
Bar temperature : 0°C/+70°C
Material : forged brass
| Part N° | Ø | Packaging |
| 2007120000800 | 1/4" | 25 |
| 2007120001200 | 3/8" | 30 |
| 2007120001500 | 1/2" | 25 |
| 2007120002000 | 3/4" | 20 |
| 2007120002600 | 1" | 20 |
| 2007120003300 | 1"1/4 | 20 |
 | Male threaded Express coupling without gasket |
Conditions of use : Water, Compressed air
Express design based on NF E29-573 standard (claw distance 41mm).
Works with all fittings based on the same standard.
Male threaded ISO 228-1
Pressure : PN 10
Bar temperature : 0°C/+70°C
Material : forged brass
| Part N° | Ø | Packaging |
| 2007120000800 | 1/4" | 25 |
| 2007120001200 | 3/8" | 30 |
| 2007120001500 | 1/2" | 25 |
| 2007120002000 | 3/4" | 20 |
| 2007120002600 | 1" | 20 |
| 2007120003300 | 1"1/4 | 20 |
Swivel connection
Swivel connection
 | Swivel connection 90° with gaskett |
Conditions of use : Water, Compressed air
Design based on NF E29-573 standard (claw distance 41 mm).
Works with all fittings based on the same standard.
Safety collar with stop to be assembled with hose clamps with safety claws.
Pressure : PN 10
Bar Temperature : 0°C/+70°C
Matérial : forged brass, NBR lip seal type A (bore Ø15)
| Part N° | Ø | Packaging |
| 2005260001900 | 19 | 10 |
 | Swivel connection straight with gaskett |
Conditions of use : Water, Compressed air
Design based on NF E29-573 standard (claw distance 41 mm).
Works with all fittings based on the same standard.
Safety collar with stop to be assembled with hose clamps with safety claws.
Pressure : PN 10
Bar Temperature : 0°C/+70°C
Matérial : forged brass, NBR lip seal type A (bore Ø15)
| Référence | Ø | Conditionnement |
| 2005270001900 | 19 | 10 |
Safety collar
Safety collar
 | Hose connection with safety collar |
Cast iron serie
Use: Compressed air
Design: according to DIN 3489(42 mm inter-claw)
Pressure: PN 10 bar
Temperature : -40°C/+95°C
Material: Body in malleable zinc-plated cast iron, oil-resistant Perbunan joint ("GOER" model)
- Formerly DIN 3483
- Collar for mounting with 3258 or 3260 clamp
No collar on diameter 32 (use a collar without claw)
| Part N° | Ø | PN | Packaging |
| 3035100001300 | 13 | 10 | 10 |
| 3035100001600 | 15 | 10 | 10 |
| 3035100001900 | 19 | 10 | 10 |
| 3035100002500 | 25 | 10 | 10 |
| 3035100003200 | 32 | 10 | 10 |
 | Female claw connection |
Cast iron serie
Use: Compressed air
Design: according to DIN 3489(42 mm inter-claw)
Pressure: PN 10 bar
Temperature : -40°C/+95°C
Material: Body in malleable zinc-plated cast iron, oil-resistant Perbunan joint ("GOER" model)
Formerly model DIN 3482
ISO 228-1 gas thread
| Part N° | Ø | Packaging |
| 3035110001400 | 1/4" | 10 |
| 3035110003800 | 3/8" | 10 |
| 3035110001200 | 1/2" | 10 |
| 3035110003400 | 3/4" | 10 |
| 3035110001000 | 1" | 10 |
| 3035110005400 | 1"1/4 | 10 |
 | Female claw connection full bore, brass joint |
Cast iron serie
Use: Compressed air
Design: according to DIN 3489(42 mm inter-claw)
Pressure: PN 10 bar
Temperature : -40°C/+95°C
Material: Body in malleable zinc-plated cast iron, oil-resistant Perbunan joint ("GOER" model)
- Perbunan seal with brass cover
- M5 steel retaining screw
- ISO 228-1 gas thread
- Must always be assembled with a perbunan joint fitting
- Direct mounting on compressor or accessories
| Part N° | Ø | Packaging |
| 3035890001200 | 1/2" | 10 |
| 3035890003400 | 3/4" | 10 |
| 3035890001000 | 1" | 10 |
 | Male claw connection full bore, brass joint |
Cast iron serie
Use: Compressed air
Design: according to DIN 3489(42 mm inter-claw)
Pressure: PN 10 bar
Temperature : -40°C/+95°C
Material: Body in malleable zinc-plated cast iron, oil-resistant Perbunan joint ("GOER" model).
- Perbunan seal with brass cover
- M5 steel retaining screw zingué, empreinte Torx T25
- ISO 228-1 gas thread
- Must always be assembled with a perbunan joint fitting.
- Direct mounting on compressor or accessories.
| Part N° | Ø | Packaging |
| 3035880003800 | 3/8" | 10 |
| 3035880001200 | 1/2" | 10 |
| 3035880003400 | 3/4" | 10 |
| 3035880001000 | 1" | 10 |
 | Male claw connection |
Cast iron serie
Use: Compressed air
Design: according to DIN 3489(42 mm inter-claw)
Pressure: PN 10 bar
Temperature : -40°C/+95°C
Material: Body in malleable zinc-plated cast iron, oil-resistant Perbunan joint ("GOER" model)
- Formerly model DIN 3481
- ISO 228-1 gas thread
- Supplied with gasket mounted 3515
| Part N° | Ø | Packaging |
| 3035120001400 | 1/4" | 10 |
| 3035120003800 | 3/8" | 10 |
| 3035120001200 | 1/2" | 10 |
| 3035120003400 | 3/4" | 10 |
| 3035120001000 | 1" | 10 |
| 3035120005400 | 1"1/4 | 10 |
 | Hose connection |
Steel series "ATLAS COPCO"
Use: Compressed air
Conception : 42 mm inter-claw, full passage
Pressure: PN 10 bar
Temperature : -40°C / +95°C
Material: Forged galvanized steel, oil resistant Perbunan joint ("GOER" model)
Assembly with clamp without claw
Delivered with assembled gasket part N° 3515
| Part N° | Ø | Packaging |
| 3035600001000 | 10 | 10 |
| 3035600001300 | 12,5 | 10 |
| 3035600001600 | 16 | 10 |
| 3035600001900 | 20 | 10 |
| 3035600002500 | 25 | 10 |
 | Female fittings grip |
Steel series "ATLAS COPCO"
Use: Compressed air
Conception : 42 mm inter-claw, full passage
Pressure: PN 10 bar
Temperature : -40°C / +95°C
Material: Forged galvanized steel, oil resistant Perbunan joint ("GOER" model)
ISO 228-1 gas thread
| Part N° | Ø | Packaging |
| 3035610003800 | 3/8" | 10 |
| 3035610001200 | 1/2" | 10 |
| 3035610003400 | 3/4" | 10 |
| 3035610001000 | 1" | 10 |
 | Male claw connection |
Steel series "ATLAS COPCO"
Use: Compressed air
Conception : 42 mm inter-claw, full passage
Pressure: PN 10 bar
Temperature : -40°C / +95°C
Material: Forged galvanized steel, oil resistant Perbunan joint ("GOER" model)
ISO 228-1 gas thread
| Part N° | Ø | Packaging |
| 3035620003800 | 3/8" | 10 |
| 3035620001200 | 1/2" | 10 |
| 3035620003400 | 3/4" | 10 |
| 3035620001000 | 1" | 10 |
 | Super safety coupling |
Steel series "ATLAS COPCO"
Use: Compressed air
Conception : 42 mm inter-claw, full passage
Pressure: PN 10 bar
Temperature : -40°C / +95°C
Material: Forged galvanized steel, oil resistant Perbunan joint ("GOER" model)
- "MODY" type design with rotating pin and safety nut
- Assembly with clamp without claw
| Part N° | Ø Inside hose | Ø Nominal | Packaging |
| 3035640001300 | 12,5 | 10 | 5 |
| 3035640001900 | 20 | 17 | 5 |
| 3035640002500 | 25 | 19 | 5 |
 | Mody fittings with hose connection |
"Mody" series - Safety fitting
"SSG" claw coupling with machined barbed shank
Use: Compressed air (for your applications requiring absolute security)
Design: according to DIN 3238: 42 mm inter-claw, full passage, rotating axis to avoid twisting of the hose, easy coupling, accidental anti-opening system (by tightening the nut after assembly), double safety stop
Pressure: PN 16 bar
Temperature : -40°C / +95°C
Material: Claws in malleable zinc-plated cast iron, ferrule in zinc-plated steel, oil-resistant Perbunan joint ("SGOR" model)
Delivered with attached gasket 3517-1
Assembly with clamp without claw
| Part N° | Ø | Packaging |
| 3035700001000 | 10 | 5 |
| 3035700001300 | 13 | 5 |
| 3035700001500 | 15 | 5 |
| 3035700001900 | 19 | 5 |
| 3035700002500 | 25 | 5 |
 | Female mody connection |
"Mody" series - Safety fitting
Claw connector "SSGI" with threaded end
Use: Compressed air (for your applications requiring absolute security)
Design: according to DIN 3238: 42 mm inter-claw, full passage, rotating axis to avoid twisting of the hose, easy coupling, accidental anti-opening system (by tightening the nut after assembly), double safety stop
Pressure: PN 16 bar
Temperature : -40°C / +95°C
Material: Claws in malleable zinc-plated cast iron, ferrule in zinc-plated steel, oil-resistant Perbunan joint ("SGOR" model)
Delivered with attached gasket 3517-1
ISO 228-1 gas thread
| Part N° | Ø | Packaging |
| 3035710001200 | 3/8" | 5 |
| 3035710001500 | 1/2" | 5 |
| 3035710002000 | 3/4" | 5 |
| 3035710002600 | 1" | 5 |
 | Male mody connection |
"Mody" series - Safety fitting
"SSGA" claw connector with threaded end
Use: Compressed air (for your applications requiring absolute security)
Conception :selon la norme DIN 3238 : 42 mm inter-claw, full passage, rotating axis to avoid twisting of the hose, easy coupling, accidental anti-opening system (by tightening the nut after assembly), double safety stop
Pression :PN 16 bar
Temperature :-40°C / +95°C
Material: Claws in malleable zinc-plated cast iron, ferrule in zinc-plated steel, oil-resistant Perbunan joint ("SGOR" model)
Delivered with attached gasket 3517-1
ISO 228-1 gas thread
| Part N° | Ø | Packaging |
| 3035720001200 | 3/8" | 5 |
| 3035720001500 | 1/2" | 5 |
| 3035720002000 | 3/4" | 5 |
| 3035720002600 | 1" | 5 |
 | Connection for blasting hose |
Blasting serie
"SS T" claw fittings for hose
Delivered with attached gasket 3522
Nylon body on request
Use: Connection for sandblasting work
Design: 58 mm between-claws, locking possible with safety pin
Pressure: PN 12 bar
Material: Body in malleable zinc-plated cast iron, joint in Perbunan ("SKD" model)
| Part N° | Type | Size hose | Lenght | PN | Packaging |
| 3032850001900 | SS 19 T | 19 x 6 | 155 | 12 | 1 |
| 3032850002500 | SS 25 T | 25 x 7 | 86 | 12 | 1 |
| 3032850003200 | SS 32 T | 32 x 8 | 92 | 12 | 1 |
| 3032850003800 | SS 38 T | 38 x 9 | 137 | 12 | 1 |
| 3032850004000 | SS 40 T | 40 x 10 | 138 | 12 | 1 |
 | Female connection for blasting hose |
Blasting serie
"SK T" claw fittings with threaded end,Delivered with attached gasket 3522
- ISO 228-1 gas thread et Coarse Thread Series
Nylon body on request
Use: Connection for sandblasting work
Design: 58 mm between-claws, locking possible with safety pin
Pressure: PN 12 bar
Material: Body in malleable zinc-plated cast iron, joint in Perbunan ("SKD" model)
| Part N° | Type | Thread | Lenght (mm) | PN | Packaging |
| 3032860003800 | SK 38 T | G1"1/4 | 55 | 12 | 1 |
| 3032860381500 | SK 38/15 T | G1"1/2 | 55 | 12 | 1 |
| 3032860005000 | SK 50 T | Coarse Thread 50 mm | 55 | 12 | 1 |
| 3032860006000 | SK 60 T | G2`` | 78 | 12 | 1 |
Gasket
Gasket
 | Reduced bore red EPDM gasket (type A) for express coupling |
Material : red EPDM
Reduced bore (type A) Ø15
Standard : NF E29-573
Condition of use : Water, air
Temperature : -10°C / +90°C
| Part N° | Reduced bore | PN | Packaging |
| 2005190000000 | 15 | 10 | 10 |
 | Full bore red EPDM gasket (type A) for express coupling |
Material : red EPDM
Full bore (type A) : 21 mm
Standard : NF E29-573
Condition of use : Water, air
Temperature : -10°C / +90°C
| Part N° | Full bore | PN | Packaging |
| 2005290000000 | 21 | 10 | 10 |
 | Replacement gasket SGOR-n fittings MODY |
Conditions of use : Oil, air
Temperature : -40°C/+95°C
| Référence | Modèle | Ø extérieur | Hauteur | Shore | Conditionnement |
| 3035170000001 | SGOR-n | 30 | 4 | 75 | 50 |
 | Replacement gasket TFEP for express fittings |
Size : Ø 34 x Height 10,5 mm
Full bore: 20 mm
Temperature : -40°C / +200°C
Shore : 65
Conditions of use : Steam
| Part N° | Shore | Packaging |
| 3035160000000 | 65 | 10 |
 | Rubber gasket full bore |
Standard : NF E29-573
Conditions of use : Water, air
Temperature : -10°C +90°C
| Part N° | Full bore | PN | Packaging |
| 2005240000000 | 21 | 10 | 10 |
 | replacement gasket GOER for express fittings |
Size : Ø 34 x height 10,5 mm
Full bore: 20 mm
Temperature : -40°C / +95°C
Shore : 65
| Part N° | Shore | Packaging |
| 3035150000000 | 65 | 10 |
 | Replacement gasket GVOR for express fittings |
Full bore : 20 mm
Temperature : -40°C / +200°C
Shore : 60
Conditions of use : Steam
| Part N° | Shore | Packaging |
| 3035200000000 | 60 | 10 |
 | Replacement gasket GOOR for express fittings |
Size :Ø 34 x height 10,5 mm
Full bore: 20 mm
Temperature : -40°C / +95°C
Shore : 50
| Part N° | Shore | Packaging |
| 3035190000000 | 50 | 100 |
 | Replacement gasket SDORN fittings mody |
- Material : Ohasil
- Resistance : Steam
- Medium : Steam
- Colour : Natural
- Shore : 75
- Symb. : SDORN
- Temperature : - 40 °C / + 200 °C
| Part N° | Model | Ø external | Height | Shore | Packaging |
| 3035140000000 | SDOR-N | 30 | 4 | 75 | 10 |
 | Replacement gasket SKD perbunan for connection blasting hose |
- Full bore : 31 mm
| Part N° | Model | Ø external | Height | Shore | Packaging |
| 035220000000 | SKD | 48,5 | 10,5 | 60 | 10 |
 | NBR rubber gasket type A |
Standard : NF E29-573
Conditions of use : Water, compressed air, oil
Temperatures : -10°C/+70°C
| Part N° | Ø | Packaging |
| 2005140000000 | 10 |
 | Rubber gasket EPDM for express fittings |
Standard : NF E29-573
Conditions of use : Water, compressed air
Temperatures : -10°C +90°C
| Part N° | Full bore | PN | Packaging |
| 2005150000000 | 15 | 10 | 120 |
Clamping jaw
Clamping jaw
 | Clamping jaw - black steel |
| Part N° | Ø | Ø external | PN | Packaging |
| 3005150001700 | 17 | 16-18 | 10 | 10 |
| 3005150003600 | 36 | 34-37 | 10 | 10 |
| 3005150003800 | 38 | 37-38 | 10 | 10 |
 | Clamping jaw - galvanized steel |
| Part N° | Ø | Ø external | PN | Packaging |
| 3015150001700 | 17 | 16-18 | 10 | 10 |
| 3015150002000 | 20 | 19-21 | 10 | 10 |
| 3015150002300 | 23 | 22-24 | 10 | 10 |
| 3015150002600 | 26 | 25-27 | 10 | 10 |
| 3015150002900 | 29 | 28-30 | 10 | 10 |
| 3015150003200 | 32 | 31-33 | 10 | 10 |
| 3015150003600 | 36 | 34-37 | 10 | 10 |
| 3015150003800 | 38 | 37-39 | 10 | 10 |
Miscellaneous
Safety pin & Female jonction
 | Safety pin - galvanized steel |
Material : galvanized steel
Wire : Ø3 mm
Part N° : 3035650000000
 | Female jonction |
For connection blasting hose
Thread ISO 228-1 et Coarse Thread Series
Body : Aluminium
Pressure : PN 12 bar
| Part N° | Model | Tuyau | Thread | L (mm) | PN | Packaging |
| 3032870323200 | SD32-32A | 32 x 8 | G1"1/4 | 130 | 12 | 1 |
| 3032870503200 | SD 50-32A | 32 x 8 | Coarse thread 50 mm | 130 | 12 | 1 |
Air King couplings : American-type - CROWFOOT COUPLING
This range of couplings is intended for compressed air pipes used at ambient temperature and a pressure of 10 bar.
It is advisable to use the safety pin provided with the coupling to avoid any accidental disconnection.
Furthermore, a safety cable fitted with two eyes may be installed on the connection between two hoses.
Male NPT
Male NPT Ends
 |  |
Features:
- supplied with safety clip
- pressure rating: 150 PSI at ambient temperature (70°F)
- supplied with rubber washer, part # AWR4
| Référence | Size | A | B | C | D | E | NPT | ||
| Iron | Brass | Stain. Steel | |||||||
| AMB1 | ABB1 | -- | 1/4" | 2-1/2" | 2-9/16" | 1" | 7/16" | 5/8" | 1/4" |
| AMB | ABB | RAMB | 3/8" | 2-1/2" | 2-9/16" | 1" | 7/16" | 5/8" | 3/8" |
| AM2 | AB2 | RAM2 | 1/2" | 2-1/2" | 2-11/16" | 1⅛" | 1/2" | 13/16" | 1/2" |
| AM7 | AB7 | RAM7 | 3/4" | 2-1/2" | 2-13/16" | 1⅜" | 9/16" | 7/8" | 3/4" |
| AM12 | AB12 | RAM12 | 1" | 2-1/2" | 2-7/8" | 1-1/2" | 5/8" | 7/8" | 1" |
Female NPT
Female NPT Ends
 | |
Features:
- supplied with safety clip
- pressure rating: 150 PSI at ambient temperature (70°F)
- supplied with rubber washer, part # AWR4
| Référence | Size | A | B | C | D | NPT | ||
| Iron | Brass | Stain. Steel | ||||||
| AMC1 | ABC1 | -- | 1/4" | 2-1/2" | 2-7/16" | 1-1/8" | 3/8" | 1/4" |
| AMC | ABC | RAMC | 3/8" | 2-1/2" | 2-7/16" | 1-1/8" | 3/8" | 3/8" |
| AM3 | AB3 | RAM3 | 1/2" | 2-1/2" | 2-7/16" | 1-1/8" | 3/8" | 1/2" |
| AM8 | AB8 | RAM8 | 3/4" | 2-1/2" | 2-1/2" | 1-7/16" | 3/8" | 3/4" |
| AM13 | AB13 | RAM13 | 1" | 2-1/2" | 2-1/16" | 1-5/8" | 3/8" | 1" |
Hose Ends
Hose Ends
 |  |
Features:
- supplied with safety clip
- pressure rating: 150 PSI at ambient temperature (70°F)
- supplied with rubber washer, part # AWR4
| Part N° | Size | A | B | C | D | ||
| Iron | Brass | Stain. Steel | |||||
| AMH | ABH | RAMH | 3/8" | 2-1/2" | 3-1/2" | 1-11/16" | 7/16" |
| AM1 | AB1 | RAM1 | 1,/" | 2-1/2" | 3-7/16" | 1-5/8" | 17/32" |
| AM5 | AB5 | -- | 5/8" | 2-1/2" | 4-1/4" | 2-7/16" | 11/16" |
| AM6 | AB6 | RAM6 | 3/4" | 2-1/2" | 3-15/16" | 2-1/8" | 25/32" |
| AM11 | AB11 | RAM11 | 1" | 2-1/2" | 4-25/32" | 2-13/16" | 1-1/16" |
Blank Ends
Blank Ends
 |  |
Features:
- supplied with safety clip
- pressure rating: 150 PSI at ambient temperature (70°F)
- supplied with rubber washer, part # AWR4
| Part N° | ||
| Iron | Brass | Stain. Steel |
| AM0 | AB0 | RAMO |
Triple Connections
Triple Connections
 |  |
Features:
- supplied with safety clip
- pressure rating: 150 PSI at ambient temperature (70°F)
- supplied with rubber washer, part # AWR4
| Part N° | |
| Iron | Brass |
| AM10 | AB10 |
Clamps
Air King Clamps
 |  |
Torque values for clamps are based on dry bolts.
The use of lubricant on bolts will adversely effect clamp performance.
| Plated iron code | Size | Hose OD | Torque | A | B | C | D | |
| From | To | |||||||
| CD 3 | 3/8" | 44/64" | 56/64" | 6 | 9/16" | 1-11/16" | 1-7/16" | 3/16" |
| A4 | 1/2" | 1" | 1-12/64" | 6 | 11/16" | 2-1/16" | 1-17/32" | 5/32" |
| A9 3 | 3/4" | 1-8/64" | 1-20/64" | 21 | 7/8" | 2-13/16" | 1-21/32" | 1/8" |
| A10 2,3 | 1" | 1-20/64" | 1-32/64" | 21 | 7/8" | 2-19/32" | 1-15/16" | 9/32" |
| A1 4 | 1" | 1-32/64" | 1-52/64" | 21 | 1" | 3-1/32" | 2-1/4" | 5/32" |
1 : recommended torque rating given in lbs.
2 : can be used with AM6 and AM11
3 : global investment cast carbon steel