Hydraulic hoses with steel braid

Intended for mi-range pressure hydraulic applications, the T111 is frequently used on handling and industrial equipment for pilot and drain lines.
With its dimensions reduced to the standard’s limits, it can accept all hydraulic fittings with ease and rapidity.
It can be produced with a high abrasion resistant outer cover under part N° T112.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 1 steel braid
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 853 1SN - DN (mm/inch) - wp/ps (bars) - batch N°

This hose is designed for applications Oleo-hydraulic which the temperature of the oil can reach 135 ° C continuous, with peaks at 150 ° C.
this hose can be used in an atmosphere at -50 ° C.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 1 steel braid
Outer cover : abrasion and weather-resistant CR rubber
Outer finish : wrapped
Temperature : -50°C to +135° C, peaks to 150° C
Production lengths : variable
Colour : blue
Marking : Tecalemit Flexibles - part N° - NF EN 853 1SN - DN (mm/inch) - high temperature - wp/ps (bars) - batch N°

This hose combines great physical properties, in terms of working pressure and bend radius, with reduced dimensions.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - T116 - DN (mm/inch) - wp/ps (bars) - batch N°

Hose type T117 according to SAE 100 R17 is an “isobaric” hose.
The minimum working pressure defined by the standard is 210 bar irrespective of its diameter.
The hose has a 1 steel wire braid reinforcement up to diameter 3/8” and 2 steel wire braids above.
Working pressures are indicated for the hose as such.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - T117 - DN (mm/inch) - wp/ps (bars) - batch N°

Produced according to the standard EN 857 1SC, the T121 hose has reduced dimensons and low bend radius.
Requiring care during assembly, it is preferred by OEMs and appreciated for its cost.
Produced on request.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : nitrile rubber
Reinforcement : metal braid
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - T121 - NF EN 857 1SC - DN (mm/inch) - wp/ps (bars) - batch N°

Hose type T211, intended to convey hydraulic oil at high pressure, has two metal braids.
Its fine tape wrapped thin outer cover can accept swaging without skiving, using the appropriate ferrules.
Polyvalent and easy to use, it is always readily available throughout our distribution network.
This hose can be produced with a higher abrasion-resistant outer cover under hose N° T212.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - T211- DN (mm/inch) - wp/ps (bars) - batch N°

This hose is designed for applications Oleo-hydraulic which the temperature of the oil can reach 135 ° C continuous, with peaks at 150 ° C.
this hose can be used in an atmosphere at -50 ° C.
The quality of its neoprene outer cover complies with MSHA requirements.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion and weather-resistant neoprene rubber
Outer finish : wrapped
Temperature : -50°C to +135° C, peaks to 150° C
Production lengths : variable
Colour : blue
Marking : Tecalemit Flexibles - part N° - T211- DN (mm/inch)) - high temperature - wp/ps (bars) - batch N°

Hose T214 is intended to be used with mid and high pressure hydraulic systems in industrial and agricultural applications.
It is especially resistant to abrasion, oil, fuel and atmospheric agents thanks to its special synthetic rubber coating.
Furthermore, it is very well suited to maritime applications thanks to its sea water resistance.

Technical specifications :
Inner tube : Special synthetic rubber resistant to hydraulic and mineral oils and lubricants.
Reinforcement : 2 steel braids
Outer cover : Special synthetic rubber resistant to high levels of abrasion, oils, fuels and atmospheric agents.
Outer finish : wrapped
Temperature : - 40°°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - Part N° - NF EN 853 2SN - DN (mm et pouce) - ANTI ABRASIF - N°Lot

Hose T221 exceeds the requirements of standard NF-EN 857 2SC which sets out the characteristics of so-called “compact” hydraulic hoses.
These hoses are lighter, offer a better bend radius and a greater pressure burst resistance than hydraulic hoses compliant with the previous standard.
Furthermore, the standard version also meets MSHA (Mining and Safety Health Administration) standards. But upon request, it can also be manufactured with a standard neoprene coating or an anti-abrasion coating in reticulated polyethylene.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : 2 steel braids
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 120°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - NF EN 857 2SC - DN (mm/inch) - wp/ps (bars) - batch N°

Intended for high pressure washing up to 400 bars, this hose is available in two different outer finishes : a very resistant black and a non-marking blue.
In both cases, the outer cover is resistant to animal fats and a wide range of detergents and the thickness of its outer cover is very wear-resistant.

Technical specifications :
Inner tube : black high temperature nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion resistant neoprene rubber
Outer finish : wrapped
Temperature : -30°C to +120°C, intermittent 150°C
Colour : black
Marking : Tecalemit Flexibles - part N° - lavage 400 bars 120°C - DN (mm/inch) - batch N°

Intended for high pressure washing up to 400 bars, this hose is available in two different outer finishes : a very resistant black and a non-marking blue.
In both cases, the outer cover is resistant to animal fats and a wide range of detergents and the thickness of its outer cover is very wear-resistant.

Technical specifications :
Inner tube : black high temperature nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion resistant neoprene rubber
Outer finish : wrapped
Temperature : -30°C to +120°C, intermittent 150°C
Colour : blue
Marking : Tecalemit Flexibles - part N° - lavage 400 bars 120°C - DN (mm/inch) - batch N°

Hose intended for hydraulic oil and greases under mid-range pressures, the T510 has a textile braid, a steel braid and covered by neoprene impregnated cotton braiding increasing its resistance to wear and abrasion.
Its weight, dimensions and bend radius are very low.
It is produced in specific diameters.
It is preferred in specific industrial appplications for these qualities.
It is used with reusable hydraulic fittings and is widely used on handling and lubrication equipment.
With the same specifications but with a neoprene wrapped-effect finish, T511 can be manufactured on request.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : textile and metal braids
Outer cover : neoprene rubber impregnated cotton braid
Outer finish : textile braid
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - SAE 100 R5 - DN (mm/inch) - batch N°

Hose intended for hydraulic oil and greases under mid-range pressures, the T511 has a textile braid, a steel braid and is especially resistant to abrasion, oil, fuel and atmospheric agents thanks to its special synthetic rubber coating.
Its weight, dimensions and bend radius are very low.
It is produced in specific diameters.
It is preferred in specific industrial appplications for these qualities.
It is used with reusable hydraulic fittings and is widely used on handling and lubrication equipment.
With the same specifications but with a neoprene wrapped-effect finish, T511 can be manufactured on request.

Technical specifications :
Inner tube : black nitrile rubber
Reinforcement : textile and metal braids
Outer cover : neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +100°C - peaks to 125°C
Production lengths : variable
Colour : black
Marking : Tecalemit Flexibles - part N° - SAE 100 R5 - DN (mm/inch) - batch N°

T513 can convey hot fluids under mid-range pressures.
It is compatible with hydraulic oils up to a temperature of 135°C with peaks to 150°C and compressed air/oil mixture up to 120°C.
It can be equipped with tecalemit flexibles® original reusable fittings.

Technical specifications :
Inner tube : synthetic rubber
Reinforcement : textile and metal braids
Outer cover : rubber impregnated textile braid
Outer finish : textile braid
Temperature : - 50°C to +135°C - peaks to 150°C
Production lengths : variable
Colour : blue
Marking : Tecalemit Flexibles - part N° - SAE 100 R5 - DN (mm/inch) - batch N°