Type approval certificates for hydraulic hoses
Development of the company and its infrastructures
Tecalemit Flexibles strengthens its presence in the energy sector
A pulse bench with exceptional capabilities
Hose type approvals for the transport of hazardous materials
A depollution bench of our design
BV type certification for fire resistant hoses
DE 
ES 
EN 
FR Hose type approvals for the transport of dangerous goods
Hose manufacturers for dangerous goods since 1993, in particular for hot bitumens (180 ° C), we pay extreme and permanent attention to quality and safety standards, in an area where legislation is rapidly changing.
RUBBER FLEXIBLE 401
Bitumen and tar suction and delivery hose 180°C (pressure : 10 bars / diameters : 19 mm to 63 mm)
These hoses can be equipped with various fittings with grooved hose-shank in galvanized steel from our manufacture.
Substances that can be transferred have N° ONU 1268, 1999, 3082, 3256 and 3257 and are in classes 3 or 9.
RUBBER FLEXIBLE 403 NF EN 1360 type 1
Measured fuel distribution (Working pressure : 16 bars / diameters : 32 to 35 mm).
These hoses are made with 1 ’½’ male or female threaded fittings in zinc-plated steel with aluminum covers and galvanized steel bending spring. Substances that can be transferred have N° ONU 1202, 1203, 1999, 1223, et 1267 and are all Class 3.
FLEXIBLE COMPOSITE 416 NF EN NF 13765 according on the version of June 2018
Transfer of fuels and many classified chemicals (diameters : 25 to 100 mm)
Hose 416 GGE is intended for suction and delivery hydrocarbon at a pressure of 10 or 14 bars, and has 2 galvanized steel spirals and a polypropylene tube.
Hose 416 AAE is the same pipe but in a light version because it has 2 aluminum spirals, and its operating pressure is 10 bars.
Hose 416 SST, with a working pressure of 14 bar, is suitable for a large number of chemicals because its spirals are made of 316L stainless steel and its tube is made of PTFE.
We equip these hoses with aluminum, bronze or stainless steel fittings, and flanged fittings according to the different international classes.
RUBBER FLEXIBLE 495 NF EN 1761 SD
Suction and delivery of hydrocarbons (pressure : 10 bars / diameters : 75 mm to 150 mm).
These hoses can be equipped with various fittings with grooved hose-shank in aluminum, bronze or steel. Substances that can be transferred have N° ONU 1202, 1203, 1999, 1223, et 1267 and are all Class 3.
More informations